AiTC v1.0

Enter override lines only (one aircraft per line). Format (26 fields):

TYPE CATEGORY CEILING_FL … MAX_MACH VAPP_KIAS_MIN VAPP_KIAS_MAX TAKEOFF_KIAS INITIAL_CLIMB_KIAS CLIMB_TO_100_KIAS CLIMB_TO_CONV_KIAS MIN_CLEAN_KIAS

Speed profile: takeoff, initial climb (first 2000 ft AAL), climb to FL100, climb to IAS/MACH conversion, minimum clean, and final approach (Vapp) range. Legacy shorter lines are still accepted. Leaving overrides empty uses the default database.

Aircraft type

Source: -

CATEGORY

CEILING_FL

VAPP_KIAS_MIN

VAPP_KIAS_MAX

TAKEOFF_KIAS

INITIAL_CLIMB_KIAS

CLIMB_TO_100_KIAS

CLIMB_TO_CONV_KIAS

MIN_CLEAN_KIAS

KIAS_LOW_MAX

KIAS_LOW_NORM

KIAS_LOW_MIN

KIAS_MID_MAX

KIAS_MID_NORM

KIAS_MID_MIN

KIAS_HIGH_MAX

KIAS_HIGH_NORM

KIAS_HIGH_MIN

CLIMB_MAX_FPM

CLIMB_NORMAL_FPM

DESC_MAX_FPM

DESC_NORMAL_FPM

MIN_MACH

NORMAL_MACH

MAX_MACH

Taxi speed

TAXI_KT

TAXI_ACCEL_KT_S

TAXI_DECEL_KT_S

TAXI_TURN_KT

Straight-line taxi GS, acceleration, deceleration (stop and turns), and max speed through a turn.

Overrides

ICAO 3-letter airline codes and the spoken operator name used in pilot phraseology and TTS readbacks.

Search airline code or phraseology callsign

Airline code	Phraseology callsign	Actions

Name of the session

Mode of operation

Hosted sessions use DL mode only. As host you have full control on all aircraft, all label colors, and no role restrictions. Joining users use separate roles (EXE, PLN, etc.).

Active sessions

Your ATC sector

Select the sector you will control for this exercise. You cannot change sector after the simulation starts.

Mode of operation

Select a mode for this simulation run.

Name of sub-flow

Route of sub-flow

Space-separated waypoints/routes, or use Pick on Map.

Callsigns to be used (letter part only, comma-separated)

ADEP and ADES pairs to be used Pairs separated by commas (space between ADEP and ADES within each pair).

PEL ALV RLV pairs to be used Each triplet: PEL ALV RLV. Multiple triplets separated by commas.

Departure Tick if this sub-flow is a departure sub-flow.

On the Ground Tick if aircraft in this sub-flow start on the ground.

Callsign (no spaces)

Aircraft Type

ADEP

ADES

No spaces. Must be unique within this exercise.

Departure Note: tick ON only for departures within the Airspace

On the Ground Aircraft starts still at airport elevation, with the On the Ground label.

Route (space-separated)

Tokens separated by spaces (commas also accepted). Use waypoints, NAVAIDS, coordinates DDMMSSN/DDDMMSSE, hyphen-linked legs, or a sector route name placed between two fixes (waypoint or NAVAID) that lie on that route — the segment expands to all intermediate fixes. A NAVAID/waypoint before or after a route marks entry onto or exit from that route.

Spawn time (s)

PEL

ALV

RLV

CLICK HERE for WAYPOINTS, ROUTES, ATC SECTORS, AREAS and HOLDINGS

Waypoints

NAVAIDs

Routes

ATC Sectors

Areas

Holdings

Taxiways

Parkings

Preview options

PAGE PREVIEW: 1 / 1

Lock freezes zoom and pan for this page; EXPORT uses this framing for this page only. Click again to unlock.

Map orientation Columns of data

Appendix pages only — more columns fit more lines per sheet.

Map Options

No area selected yet.

Show on Map

Show waypoints name on map Show routes names on map Show waypoints names and coordinates on next pages Show distance between waypoints on routes in the map Show routes names and waypoints on the next pages Show Airport symbol and name Show Runways Show Runway Names

Size on Map

Font size — waypoint names on map12 Waypoint symbol size8 Font size — route names on map11 Font size — airport name12 Font size — runway name10 Font size — route segment distances10 Thickness — route lines2 Thickness — ATC sector lines2 Thickness — runway lines2 Font size — text other than map (next pages)11

Exclusions from the map

Move on the map

Thickness of leader line (1 = thinnest) 1

Add to map

ATC Sector name

ATC Sector Frequency

Boundary (paste points, one per line) Points: <Name> <DDMMSSN> <DDDMMSSE> (≥2). Optional ARC on its own line between two points:
ARC <DDMMSSN/DDDMMSSE> R<nm> CW|CCW — e.g. ARC 232600N/0754300E R12 CW (centre, radius NM, clockwise/counter-clockwise).
Full circle (alone): <Name> <DDMMSSN/DDDMMSSE> R<nm> — e.g. CTR 251547N/0513653E R15.
Approximation: arc bearings use the stated centre to the flanking points; sample radius blends the two centre→point distances so the arc meets both vertices (stated R is kept for reference).

TOP (FL)

Use UNL for unlimited (stored as FL999).

BOTTOM (FL)

Use GND for ground (ground layer elevation if defined, else FL000).

TRANSITION FL

Below this level refer as altitude, above refer as Flight Level.

Associate Airport

Comma-separated ICAOs from this airspace. Associated airports enable runway / approach label tools for this ATC sector even when the airport is outside the sector geographically or vertically.

Existing ATC Sectors

Area name

Area type

Other action

Outline color

Boundary (paste points, one per line) Points: <Name> <DDMMSSN> <DDDMMSSE> (≥2). Optional ARC on its own line between two points:
ARC <DDMMSSN/DDDMMSSE> R<nm> CW|CCW — e.g. ARC 232600N/0754300E R12 CW.
Full circle (alone): <Name> <DDMMSSN/DDDMMSSE> R<nm> — e.g. WP1 232545N/0754255E R2.3.
Approximation: arc bearings use the stated centre to the flanking points; sample radius blends the two centre→point distances so the arc meets both vertices (stated R is kept for reference).

TOP (FL)

Use UNL for unlimited (stored as FL999).

BOTTOM (FL)

Use GND for ground (ground layer elevation if defined, else FL000).

Existing Areas

Simulation

00:00:00

NM

Label setup

Name

Pick what each of the 5 rows shows for airborne aircraft. Empty rows are hidden.

Select configuration

Name

Assign a saved label configuration for each flight status (NON-Hover = label shown normally; Hover = label shown while the mouse is over that aircraft’s label on the radar display).

NON-Hover Hover

Concerned IN (CIN)

Concerned OUT (COU)

In Transfer IN (TIN)

In Transfer OUT (TOU)

Assumed (ASM)

Unconcerned OUT (UOU)

Unconcerned IN (UIN)

Each airport has its own 3D Tower (maps, buildings, tower locations). Changes are applied to the airspace as you make them. Use Save Airspace when you are done.

Airport

Enable 3D Tower for this airport

Ground maps

Select one or more backgrounds already added on the Edit Airspace map (uploaded pictures or Google Earth). Each airport can use a different set. Use the arrows to set 3D overlap priority: the top of the list wins where maps overlap; the bottom of the list is drawn underneath. Only the overlapping area uses this order — the rest of each map still shows.

Buildings

Tower locations

Viewpoint positions for this airport (coordinates + altitude). You can add more than one.

Image file

JPG, PNG, WebP, GIF, etc. Used only while editing this airspace; not stored in the sector file.

Zoom & pan: use the mouse wheel on the picture to zoom in or out for precise point placement. Middle-click and hold to drag (pan) the picture when zoomed. After a point is placed, drag the orange dot with the left button to fine-tune it.

AI Pilot

Scripts

View Options

Stop the presentation?

Continue the presentation?

Sign in

Sign up

SAdmin

Valid Users

Non-Valid Users

Deleted Users

Organisations

Approval Requests

MCP action log

User

Confirm delete

Organisation

Airspaces & exercises

Prerogatives

Select organisation

Playback

Recordings

Select a recording

Settings

Admin

Admin Settings

AI SUPPORT

Knowledge library

AI Pilot General Instructions

Export Data

Airspaces

Exercises

Import Data

Airspaces in file

Exercises in file

Edit Aircraft Database

3D aircraft model

Edit Airlines Database

Reset Airlines Database

Caution

Unsaved Changes

Start Session

Start Simulation

Step 1: Select an Airspace

Select an Exercise

How do you want to run?

Join as ATC position

AI_PP Push-to-Talk

Create Exercise

Delete Exercises

Delete Airspace

Edit Exercise

AI Pilot

Scripts

View Options

Create Flows

Existing Flows

Flights

New flow

Flow details

Existing Sub-Flows

Create Sub-Flow

Delete Sub-Flow

All flights

AI Pilot Script

Delete all scripts

Generate Init. Calls

Duplicate Exercise

Save flows

Delete Flow

Add Flight

Add Multiple Flights

Adding Flights

Edit Airspace